Column Lifts

Column Lifts

A comprehensive and varied range of multipurpose lifts designed to suit almost all needs from small rental vehicles to large distribution fleets. Standard Lifts are built with a wide range of options and cover lifting capacities from 300Kg to 2000Kg.  Ross & Bonnyman are accredited to ISO9001:2000 and all lifts are designed according to CE Regulations.

 

Slimline

Slimline Column LiftsAll Slimline lifts are manufactured with a floor level beam with easy access for maintenance. Attachment of the lift is normally by bolt on through special built in fixings. Weld on lifts are also available. Lift frames can be specified in either hot dipped galvanised steel or with the steel finished with holding primer paint.

Anodised aluminium, steel tread plate and wood infill platform surfaces are readily available with anti slip hot metal spray and rubberised coatings offered as additional options. Lifts can be supplied with the platform rising above the vehicle floor level allowing offloading at higher dock levels than the vehicle floor height.

 

Overhead Beam

Overhead Beam Column LiftsOverhead beam lifts normally have the beam and lifting mechanism at roof level and are particularly useful for applications in the dairy and grocery industries, which require regular cleaning of the vehicle interior where contamination would interfere with beams at floor level. Attachment of the lift is normally by weld on with bolt on lifts also available.

Lift beams and columns can be specified in either hot dipped galvanised steel or with the steel finished with holding primer paint. Beam covers are available in stainless steel, fibreglass or mild steel with holding primer paint. Anodised aluminium, steel tread plate, and wood infill platform surfaces are readily available with anti-slip hot metal spray and rubberised coatings offered as additional options. Lifts can be supplied with the platform rising above the vehicle floor level allowing offloading at higher dock levels than the vehicle floor height.

 

Shallow Beam

Shallow Beam Column LiftsShallow beam lifts are lightweight tail lifts with the power pack normally housed within the floor beam. Lifting capacities are normally 500kg, 800kg and 1000kg. Lifts are extremely light in weight but remain robust in arduous working conditions. This type of lift has no chain return tube and therefore can not be raised above the top of the beam or floor level.

Attachment of the lift is normally by bolt on through special built in fixings. Weld on lifts are also available. Lift frames are normally specified in hot dipped galvanised steel but can also be in steel finished with holding primer paint. Anodised aluminium plank, steel or aluminium tread plate, as well as wood or mesh infill platform surfaces are readily available. Anti slip hot metal spray and rubberised coatings can be offered as additional options.

 

Lightweight

Lightweight  Column LiftsSlimline lifts with 500Kg & 1000Kg lifting capacity are designed with a lighter weight platform carrying slide mechanisms and lightweight anodised aluminium plank platform construction.

Lifts can be supplied with the platform rising above the vehicle floor level allowing offloading at higher dock levels than the vehicle floor height. Attachment of the lift is normally by bolt on through special built in fixings. Weld-on lifts are also available. Lift frames are normally specified in hot dipped galvanised steel but can also be in steel finished with holding primer paint.

 

Inset

Inset Column LiftsAll Inset tail lifts are manufactured with a floor level beam with easy access for maintenance. Side panels are supplied in prime painted steel for operator protection. The platform is normally stored in the horizontal position forming the rear floor section of the vehicle. Attachment of the lift is normally by bolt on through special built in fixings.

Weld-on lifts are also available. Lift frames can be specified in either hot dipped galvanised steel or with the steel finished with holding primer paint. Steel framed platforms with wood infill are normally specified but this lift can also be supplied with an aluminium plank platform. Lifts can be supplied with the platform rising above the vehicle floor level allowing offloading at higher dock levels than the vehicle floor height.

 

Tip Through Lift

Tip Through LiftsA lightweight aluminium platform with a fixed ramp leading edge assists the easy closing of this lift. Novel automatic retention of the tip of the platform whilst tipping with twist lock pivot pin retention gives easier operator control.

 

 

Call Us Today On 01307 466262

[ top of the page ]